Abrasive particles are used to blast a surface smooth through sandblasting. Sandblasting can be used to remove old paint and to prime surfaces for painting. Due to the use of sand-like particles, it can be rather messy because it blasts paint and rust away. Sablage sans poussière might sound appealing to you if you are considering sandblasting for a project. The Dust-free sandblasting procedure could be more advantageous for you for a variety of reasons.
Dust-free Sandblasting – what is it?
The traditional method of sandblasting uses dry abrasive particles to remove surface defects. A similar process as sanding, and one that can be done over a large area in a fraction of the time. Though there are some disadvantages to this method, the most significant one is that you are essentially blasting sand into an area. A proper respirator needs to be worn and protective equipment needs to be worn. After the area has been cleared, blasting can begin. As a result of that, you will have a cloud of dust on hand that needs to be removed. Performing this process can be messy and hazardous if not done correctly.
With Dust-free sandblasting, the abrasive and water are mixed. By doing this, a slushy type of solution is created, which prevents dust cloud formation.
Due to the lack of dust clouds and the small sand particles, there is no need for as much protective equipment. Moreover, the mixture is easier to contain, so it is easier to continue working nearby. Since you can see where you have already blasted, clean-up is simple and less likely to miss a spot.
Are You a Good Fit for This Method?
You can sandblast almost anything that is safe to sandblast with traditional sandblasting or Dust-free sandblasting. Due to the mixing of water with abrasives, the water stays cooler. For this reason, Dust-free sandblasting is a better choice if warping is a problem. Cost is the only difference between the two. Because the sandblasting and mixing of the water is done by a different type of machine, Dust-free sandblasting is a bit more expensive. Dust-free sandblasting is a better option if you need to blast in an area where other businesses are. We at Extreme Carpet Care can help you determine the best method for your project, based on its scope and location.
You can rely on the experts at Extreme Carpet Care for any kind of cleaning project. If you’re unsure whether to go with traditional sandblasting or Dust-free sandblasting, we can help you decide. No matter if you choose a Dust-free or traditional method of sandblasting, if you aren’t careful, the material may be damaged. If you need anything cleaned without causing damage to it, our team knows how to do it. Your project will be evaluated and you will receive our advice along the way. Get in touch with the experts at Extreme Carpet Care instead of hiring an amateur. The quality of the work is important.